Coffee & PIE! The Versatile PIE 525B Calibrator!

Coffee and PIE 525B

THIS OFFER EXPIRED ON APRIL 30, 2016 – No more free coffee…but you can still get your PIE!

Our Coffee’s On Us promos continue with a SPECIAL LIMITED TIME OFFER! 

PIE 525B
The PIE 525B Automated Thermocouple & RTD Calibrator is a versatile, yet easy to use quality instrument.

Special Offer Ends April 30, 2016:

  • We pay SALES TAX!
  • We pay SHIPPING!
  • Gourmet COFFEE CARD from a MAJOR INTERNATIONAL COFFEE HOUSE with every order!*

Coffee-Card-with-Order-200x200

 

Easy to use

With the PIE 525B you can check and calibrate all your thermocouple and RTD instruments and measure temperature sensors.

Take it into the shop, plant or field

Carry it without worry – it comes protected with a rubber boot and rugged, low profile switches. Easy to operate even in the dark areas of the plant with the backlit display.

Calibrate thermocouple instruments to 1 & 0.01 °F & °C

The PIE 525B works with the thermocouples you use including types J, K, T, E, R, S, B, N, G, C, D, L (J-DIN), U (T-DIN) and P (Platinel II). Or calibrate from -13.0000 to +80.0000 mV.

Calibrate RTD instruments to 1 & 0.01 °F & °C

Stop carrying around a decade box and RTD resistance tables. The 525B works with the RTDs you use including Platinum 10, 50, 100, 200, 500 & 1000 Ohm (alpha = 3850), Platinum 100 Ohm (alpha = 3902, 3916, 3926), Copper 10 & 50 Ohm, and Nickel 120 Ohm. Or calibrate from 0.000 to 400.000 and 0.00 to 4000.00 Ohms. For RTDs the fixed or pulsed sensor current is measured by the calibrator.

Fast calibration with automatic output stepping

Easily set any value quickly to within 0.1° or 0.01° with the adjustable digital potentiometer “DIAL” plus store any three temperatures for instant recall with the EZ-CHECK™ switch. Choose between 2, 3, 5, 11 steps and ramp to automatically increment the output in 100%, 50%, 25%, 10% or 5% of span. Select step time from 5, 6, 7, 8, 9, 10, 15, 20, 25, 30 & 60 seconds.

Compatible with ALL process instruments

No competitor’s calibrator is compatible with as many process instruments! Connect directly to the temperature inputs of transmitters, PLCs, DCS & multichannel recorders to verify their outputs or displays. RTD simulation works with older instruments with fixed excitation currents and newer multichannel instruments that switch the excitation current between input channels.

Measure thermocouple & RTD sensors

Trouble shoot sensor connections and find broken wires or corroded connections. The PIE 525B measures probes to 0.1 or 0.01 °C or °F.

Secondary display shows the millivolt or resistance value corresponding to the sensor temperature as well as the junction temperature measured by the calibrator. Troubleshoot sensor connections and find broken wires with patented technology. Connect your two, three or four wire RTDs and the PIE 525B automatically detects the connections.

Calibration Lab Accurate & Stable

The internal cold junction thermistor is accurate to ±0.05°C and is traceable to NIST. The sensor is thermally bonded to an isothermal mass which includes brass blocks with screw terminals for connection of bare thermocouple wires along with a miniature thermocouple connector for fast connections. The circuitry uses an extremely stable voltage reference and low drift components which make the PIE 525B more accurate than most other handheld and benchtop thermocouple calibrators.

Perform Heat Treating Uniformity Surveys and System Accuracy Tests

The PIE 525B meets or exceeds the requirement of AMS 2750 as a Field Test Instrument.

Evolutionary design

PIECAL Calibrators are designed and built by members of the same team that designed and built the calibrators manufactured by Fluke* under the Altek* label. The PIE 525B improves upon other brands by including a rubber boot, tilt stand, backlit display with larger digits, rugged switches & a battery compartment for fast battery changes.

* PIECAL Calibrators are not manufactured or distributed by Fluke Corp or Altek Industries Inc, manufacturers of Altek Calibrators.

Three Year Warranty!

The PIE 525B is warranted against defective material and workmanship (excluding batteries) for a period of three years from the date of shipment. Claims under warranty can be made by returning the equipment prepaid to the factory. The equipment will be repaired, replaced or adjusted at our option. The liability of Practical Instrument Electronics (PIE) is restricted to that given under our warranty. No responsibility is accepted for damage, loss or other expense incurred through sale or use of our equipment. Under no condition shall Practical Instrument Electronics, Inc. or Central California Instruments be liable for any special, incidental, or consequential damage.

Includes deluxe hands-free carrying case, rubber boot, RTD wire kit, and NIST calibration card

PIE 525B Deluxe Carrying Case

 

 

More Info

Click to download the full datasheet for the PIE 525B:

Download Datasheet

 

 

* For promotional purposes, we can let you know the name of the coffee company if you contact us directly.

 

 

Coffee and PIE 525B

Leave a Reply